, Russian Federation
, Russian Federation
, Russian Federation
The article presents a brief comparative analysis of the technologies for strengthening the rods of hydraulic cylinders of transport vehicles. It is proposed to use atmospheric plasma spraying to hard-en the surface of the rods during their manufacture and restoration. Preliminary tests have shown the possibility of creating by plasma spraying a predominant single-phase alloy with a high entropy of mixing components, providing the required coating properties.
hydraulic cylinder rods, hardening during manufacture and repair, plasma method
1. Bogorad, L. Ya. Hromirovanie – Izd. 6-e, pererab. i dop. – L. : Mashinostroenie, Leningr. otd-nie, 1984. – 97 s.
2. Lahtin, Yu. M. Teoriya i tehnologiya azotirovaniya / Yu. M. Lahtin, Ya. D. Kogan, G.-I. Shpis, Z. Bemer. – M. : Metallurgiya. – 1991. – 322 s.
3. Gerasimov, S. A. Struktura i iznosostoykost' azotirovannyh konstrukcionnyh staley i splavov / S. A. Gerasimov, L. I. Kuksenova, V. G. Lapteva. – M. : MGTU im. N. E. Baumana, 2014. – 520 c.
4. Kuksenova, L. I. Struktura i iznosostoykost' azotirovannyh konstrukcionnyh staley i splavov / L. I. Kuksenova – M. : Moskovskiy Gosudarstvennyy Tehnicheskiy Universitet (MGTU) imeni N.E. Baumana, 2012. – 428 c.
5. Kadyrmetov, A. M. Perspektivy primeneniya vysokoentropiynyh splavov dlya vosstanovleniya detaley mashin atmosfernym plazmennym napyleniem. / A. M. Kadyrmetov, D. A. Popov, E. V. Snyatkov // Mir transporta i tehnologicheskih mashin. – 2021. – № 1 (72). – S. 20-27.
6. Kadyrmetov, A. M. Rentgenostrukturnyy analiz mnogokomponentnogo splava FeCoCrAlTiCuMo, poluchennogo plazmennym napyleniem s kratnym oplavleniem / A. M. Kadyrmetov, D. A. Popov., I. A. Simakin. / V sb. : Elektrofizicheskie metody obrabotki v sovremennoy promyshlennosti. Materialy V Mezhdunarodnoy nauchno-prakticheskoy konferencii molodyh uchenyh, aspirantov i studentov. Perm', 2022. – S. 104-107.
7. B. Cantor, I. T. H. Chang, P. Knight, A. J. B. Vincent Microstructural development in equiatomic multicomponent alloys // Materials Science and Engineering : A : Elsevier, 375, pp. 213 – 218. (2004).
8. Otto, F. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy / F.Otto, A. Dlouhy, H. Bei // Acta Materialia. Vol. 61, pp. 2628-2638. (2013).
9. Firstov, S. A. Superhard coatings from high-entropy alloys // Science and innovation. Vol. 9, pp. 32-39 (2013).
10. He B. The Phase Evolution and Property of FeCoCrNiAlTix High-Entropy Alloying Coatings on Q253 via Laser Cladding // Coatings, Vol.7, pp. 157 (2017).
