Modeling of abrasive machining with adaptive hydraulic drive

Published в Actual directions of scientific researches of the XXI century: theory and practice · Volume 3, Issue 9, p. 2, 2015 · Pages 338–342 · Rubrics: Section "Computer Optimization of the Technological Modes and Design Data of the Equipment"
DOI 10.12737/16502
Received: 09.12.2015 Accepted: 09.12.2015 Published: 09.12.2015 Language of publication: RUS
in the process, we carried out theoretical studies of frequency-controlled hydraulic drive. The studies suggested circuit solution and developed a mathematical model of the hydraulic drive. Basic design and technical and economic indicators: the angular speed of rotation of the rotor of the machine within a predetermined range.
frequency-controlled hydraulic centrifugal rotary processing mathematical model.

УДК 62-523.3

МОДЕЛИРОВАНИЕ ПРОЦЕССА АБРАЗИВНОЙ ОБРАБОТКИ ДЕТАЛЕЙ С ИСПОЛЬЗОВАНИЕМ АДАПТИВНОГО ГИДРОПРИВОДА

MODELING OF ABRASIVE MACHINING WITH ADAPTIVE HYDRAULIC DRIVE

Кожухова А.В., к.т.н, доцент

ФБГОУ ВПО «Донской государственный технический университет»

г. Ростов-на-Дону, Россия

DOI: 10.12737/16502

 

Аннотация: в процессе работы проводились теоретические исследования частотно-регулируемого гидропривода. В результате исследований предложено схемотехническое решение и математическая модель разработанного гидропривода. Основные конструктивные и технико-экономические показатели: изменение угловой скорости вращения ротора станка в заданном диапазоне.

Summary: in the process, we carried out theoretical studies of frequency-controlled hydraulic drive. The studies suggested circuit solution and developed a mathematical model of the hydraulic drive. Basic design and technical and economic indicators: the angular speed of rotation of the rotor of the machine within a predetermined range.

Ключевые слова: частотно-регулируемый гидропривод, центробежно-ротационная обработка, математическая модель.

 

Keywords: frequency-controlled hydraulic, centrifugal rotary processing, mathematical model.

References

1. A.V. Kozhukhova, S.A. Plekhanov stat´ya «Razrabotka chastotno-reguliruemogo gidroprivoda dlya stankov tsentrobezhno-rotatsionnoy obrabotki detaley» Dinamika mashin i rabochikh protsessov: sb.st. Vserossiyskoy nauchn.-tekhn. konf., 8 - 10 dekabrya. - Chelyabinsk, 2009

2. A.V. Kozhukhova, S.A. Plekhanov stat´ya «Razrabotka chastotno-reguliruemogo gidroprivoda dlya stankov tsentrobezhno-rotatsionnoy obrabotki» Gidravlicheskie mashiny, gidroprivody i gidropnevmoavtomatika: sb. dokladov XIV Vserossiyskoy nauchno-tekhnicheskoy konferentsii studentov i aspirantov., 9 dekabrya. - Moskva, 2010.

3. Chernavskiy V.A., Kozhukhova A.V. Dinamicheskiy raschet gidro- i pnevmosistem: ucheb. posobie / DGTU. - Rek.UMO vuzov po universitetskomu i politekhnicheskomu obrazovaniyu. Rostov n/D, 2009, 66 str.

Login or Create
* Forgot password?