Simulation of operation of forestry disc ripper in the composition of machine and tractor unit

M. Shabanov; Mikhail N. Lysych; R. Ikonnikov

doi:doi:10.12737/14495

Simulation of operation of forestry disc ripper in the composition of machine and tractor unit

Published в Actual directions of scientific researches of the XXI century: theory and practice · Volume 3, Issue 5, p. 1, 2015 · Pages 234–238 · Rubrics: Sekciya: «Imitacionnoe modelirovanie sistem, processov, sostoyaniy»

DOI 10.12737/14495

Received: 06.11.2015 Accepted: 06.11.2015 Published: 06.11.2015 Language of publication: RUS

Authors

M. Shabanov ¹ · Mikhail N. Lysych ² · R. Ikonnikov

1 Federal State Budget Education Institution of Higher Education «Voronezh State University of Forestry and Technologies named after G.F. Morozov» (Forest Industry, Metrology, Standardization and Certification department, docent)
Voronezh, Voronezh, Russian Federation

2 Voronezh State University of Forestry and Technologies named after G.F. Morozov (kafedra lesnoy promyshlennosti, metrologii, standartizacii i sertifikacii, starshiy prepodavatel')
Voronezh, Voronezh, Russian Federation

ABSTRACT

The article describes the process of modeling the work of forest disk ripper as a part of machine and tractor unit through the creation of solid models by means of CAD. Used design environment SolidWorks and application for engineering calculations COSMOSMotion. Investigations of the three-dimensional model of the machine and tractor unit in order to study its technological capabilities.

KEYWORDS

machine and tractor unit disk ripper САD wood cuttings down stony soils analysis.

Information Text References

Authors:

1. Federal State Budget Education Institution of Higher Education «Voronezh State University of Forestry and Technologies named after G.F. Morozov» (Forest Industry, Metrology, Standardization and Certification department, docent)

Voronezh, Voronezh, Russian Federation

2. Voronezh State University of Forestry and Technologies named after G.F. Morozov (kafedra lesnoy promyshlennosti, metrologii, standartizacii i sertifikacii, starshiy prepodavatel')

Voronezh, Voronezh, Russian Federation

Type:

Article

Pages:

from 234 to 238

Status:

Published

Language:

Russian

Keywords:

machine and tractor unit, disk ripper, САD, wood cuttings down, stony soils, analysis.

Text

УДК 631.313.02

МОДЕЛИРОВАНИЕ РАБОТЫ ДИСКОВОГО ЛЕСНОГО РЫХЛИТЕЛЯ В СОСТАВЕ МТА

SIMULATION OF OPERATION OF FORESTRY DISC RIPPER IN THE COMPOSITION OF machine and tractor unit

Лысыч М.Н.,к.т.н., старший преподаватель

Шабанов М.Л., к.т.н., доцент

Иконников Р.В. ,студент

ФГБОУ ВО «Воронежский государственный лесотехнический

университет имени Г.Ф. Морозова»,

г. Воронеж, Россия

miklynea@yandex.ru

DOI: 10.12737/14495

Аннотация: В статье рассмотрен процесс моделирования работы лесного дискового рыхлителя в составе МТА основанный на создании твердотельных моделей средствами САПР. Использована среда проектирования SolidWorks и приложение для инженерных расчетов COSMOSMotion. Проведены исследования трехмерной модели МТА с целью изучения его технологических возможностей.

Summary: The article describes the process of modeling the work of forest disk ripper as a part of machine and tractor unit through the creation of solid models by means of CAD. Used design environment SolidWorks and application for engineering calculations COSMOSMotion. Investigations of the three-dimensional model of the machine and tractor unit in order to study its technological capabilities.

Ключевые слова: МТА, почвообрабатывающие орудия, дисковый рыхлитель, САПР, лесные вырубки, каменистые почвы, анализ.

Keywords: machine and tractor unit, disk ripper, САD, wood cuttings down, stony soils, analysis.

С целью повышения эффективности основной подготовки почвы в рамках эколого-ресурсосберегающих технологий нами была предложена конструкция перспективного дискового рыхлителя, обладающего высокой проходимостью при работе в условиях нераскорчеванных и захламленных вырубок, также максимальной простотой [1].

References

1. Bartenev, I. M. Sovremennye ekologicheski sbalansirovannye, resurso- i energosberegayushchie tekhnologii lesovosstanovleniya [Tekst] / I. M Bartenev, I. E. Dontsov, M. N. Lysych GOU VPO «VGLTA». - Voronezh, 2008. - 21s. Bibliogr.: 20 nazv. Rus. Dep. v VINITI

2. Lysych, M. N. Diskovyy lesnoy rykhlitel´ [Tekst] / M. N. Lysych, M. L. Shabanov, R. V. Ikonnikov. Aktual´nye napravleniya nauchnykh issledovaniy XXI veka: teoriya i praktika - Voronezh, 2015. - № 2, ch. 1 (13-1). - S. 60-64

3. Lysych, M. N. Modelirovanie raboty pochvoobrabatyvayushchikh orudiy v usloviyakh vyrubok [Tekst] / M. N. Lysych, M. L. Shabanov, I. V. Levishchev. Aktual´nye napravleniya nauchnykh issledovaniy XXI veka: teoriya i praktika. - Voronezh, 2014. - № 2, ch. 2 (7-2). - S. 327-332

This work is licensed under Creative Commons Attribution 4.0 International

Доступ и загрузка

🗂 JATS XML ❝ To cite 📎 Citations

—

Views

—

Downloads

Citations

Индексируется в

RI RINC Indexing database RI RINC Science Index Indexing database CR Crossref DOI registration OP Open Access Indexing database

Indexing and databases

RINC → RINC Science Index → Crossref →

This work is licensed under Creative Commons Attribution 4.0 International Creative Commons

Simulation of operation of forestry disc ripper in the composition of machine and tractor unit

Confirmation

Регистрация