ON THE PROBLEM OF INCREASING EFFICIENCY DRILLING OPERATION THROUGH THE USE OF CUTTING FLUIDS WITH ADDITIVES OIL NANOCLAY MINERALS DURING REPAIR AND MANUFACTURE OF PARTS TRANSPORT COMPLEX

E. Umerov

doi:doi:10.12737/13767

ON THE PROBLEM OF INCREASING EFFICIENCY DRILLING OPERATION THROUGH THE USE OF CUTTING FLUIDS WITH ADDITIVES OIL NANOCLAY MINERALS DURING REPAIR AND MANUFACTURE OF PARTS TRANSPORT COMPLEX

Published в Alternative energy sources in the transport-technological complex: problems and prospects of rational use of · Volume 1, Issue 1, 2014 · Pages 461–464 · Rubrics: Primenenie nanotehnologiy v transportno-tehnologicheskom komplekse

DOI 10.12737/13767

Received: 23.10.2015 Accepted: 23.10.2015 Published: 23.10.2015 Language of publication: RUS

Authors

E. Umerov

ABSTRACT

The main results of experimental studies of the effectiveness of the oil coolants and additives nanoclay minerals sheet structure. The results of experiments on activated MWF axial force, torque and surface quality when processing steel CVH

KEYWORDS

nanoclays additives oil coolants cutting metals

Information References

Authors:

Type:

Article

Pages:

from 461 to 464

Status:

Published

Language:

Russian

Keywords:

nanoclays additives, oil coolants, cutting metals

References

1. Tel´nov N.F. Remont mashin / N.F. Tel´nov, A.A. Ochkasov, E.I. Badarov - M.: Agropromizdat, 1992. - 558 s.

2. Shadrichev V.A. Remont avtomobiley: uchebnik dlya studentov vuzov spetsial´nosti 1609 /V.A. Shadrichev - M.: Vysshaya shkola, 1970. - 480 s.

3. Smazochno-okhlazhdayushchie tekhnologicheskie sredstva dlya obrabotki metallov rezaniem: spravochnik pod red. S.G. Entelisa, E.M. Berlinera. [2-e izd.].M: Mashinostroenie,1998. - 496 s.

4. Osher R.N. Proizvodstvo i primenenie smazochno-okhlazhdayushchikh zhidkostey (dlya obrabotki metallov rezaniem) / R.N. Osher. - M.: 1963. - 226 s.

5. Smazochno-okhlazhdayushchie zhidkosti i ikh primenenie pri proizvodstve rezhushchego instrumenta. Metodicheskie rekomendatsii. - M: VKII instrument, 1986. - 73 s.

6. Abdulgazis D.U. Eksperimental´nye issledovaniya effektivnosti maslyanoy SOTS s prisadkoy nanoglinistykh mineralov listovoy struktury / D.U. Abdulgazis [i dr.]// Rezanie i instrument v tekhnologicheskikh sistemakh: Mezhdunar. nauch.-tekhn. sb. - Khar´kov: NTU «KhPI», 2013. Vyp. 83. S.3-9.

7. Abdulgazis D.U. Povyshenie effektivnosti maslyanykh SOTS pri sverlenii titanovykh splavov primeneniem nanoglinistykh mineral´nykh prisadok / D.U. Abdulgazis [i dr.]// Uchenye zapiski Krymskogo inzhenerno-pedagogicheskogo universiteta. Vyp. 40. Tekhnicheskie nauki.- Simferopol´: NITs KIPU, 2013. S. 49-54.

Доступ и загрузка

🗂 JATS XML ❝ To cite 📎 Citations

—

Views

—

Downloads

Citations

Индексируется в

ON THE PROBLEM OF INCREASING EFFICIENCY DRILLING OPERATION THROUGH THE USE OF CUTTING FLUIDS WITH ADDITIVES OIL NANOCLAY MINERALS DURING REPAIR AND MANUFACTURE OF PARTS TRANSPORT COMPLEX

Confirmation

Регистрация