COMPENSATION OF ELASTIC VIBRATIONS OF INDUSTRIAL MECHANISMS
Rubrics: ELECTROENERGETICS
Authors:
Type:
Article
Pages:
from 82
to 85
Status:
Published
Received:
24.12.2021
Accepted:
08.01.2023
Published:
12.01.2022
Subject area:
GRNTI 44.29 Электроэнергетика
Language:
Russian
Keywords:
elastic vibrations, evaluation, positioning, screw–nut transmission
Abstract (English):
The method of compensation of elastic vibrations of electric drives of industrial positioning mechanisms, as well as methods for assessing the level of these vibrations are shown. It is proposed to choose the parameters of the electric motor and the mechanism optimal according to the criterion of minimum vibrations at the design stage of the displacement mechanisms. Positioning mechanisms of the "actuator" type with screw –nut transmission make it possible to implement this approach
The method of compensation of elastic vibrations of electric drives of industrial positioning mechanisms, as well as methods for assessing the level of these vibrations are shown. It is proposed to choose the parameters of the electric motor and the mechanism optimal according to the criterion of minimum vibrations at the design stage of the displacement mechanisms. Positioning mechanisms of the "actuator" type with screw –nut transmission make it possible to implement this approach
Keywords:
elastic vibrations, evaluation, positioning, screw–nut transmission
elastic vibrations, evaluation, positioning, screw–nut transmission
1. Klyuchev V.I. Teoriya elektroprivoda. M.Energoatomizdat,1985, 417s.
2. Basharin A.V., Novikov V.A., Sokolovskiy G.G. Upravlenie elektroprivodami. L. Energoatomizdat,1982, 392s.
3. Borcov Yu.A., Polyahov N.D., Putov V.V. Elektromehanicheskie sistemy s adaptivnym i modal'nym upravleniem. L. Energoatomizdat,1984, 216s.
4. Fedoreschenko N.V. Optimizaciya radiusa privedeniya mehanizma aktuatora dlya tochnogo pozicionirovaniya v avtomaticheskom proizvodstve / Vestnik Irkutskogo nacional'nogo issledovatel'skogo tehnicheskogo universiteta. 2019. T. 23. № 6. S.1116 -1125.
