1. Zhulev, E. N., Vokulova, Ju. A. (2017). Rezul'taty izucheniya kachestva krayevogo prileganiya karkasov iz dioksida tsirkoniya, izgotovlennykh s primeneniyem tekhnologii vnutrirotovogo lazernogo skanirovaniya Itero-Cadent v eksperimente [The results of studying the quality of the edge fit of zirconia frames made using the Itero-Cadent intraoral laser scanning technology in the experiment]. Sovremennye problemy nauki i obrazovanija [Modern problems of science and education], 1, http://www.science-education.ru/ru/article/view?id=25903 (In Russ.)
2. Demir, N., Ozturk, A. N., Malkoc, M. A. (2014). Evaluation of the marginal fit of full ceramic crowns by the microcomputed tomography (micro-CT) technique. Eur J Dent, 8, 437-444. http://dx.doi.org/10.4103/1305-7456.143612
3. Kokubo, Y., Tsumita, M., Kano, T., Sakurai, S., Fukushima, S. (2011). Clinical marginal and internal gaps of zirconia all-ceramic crowns. Journal of Prosthodontic Research, 55 (1), 40-43. https://doi.org/10.1016/j.jpor.2010.09.001
4. Al-Atyaa, Z. T., Majeed, M. A. (2018). Comparative Evaluation of the Marginal and Internal Fitness of Monolithic CAD/CAM Zirconia Crowns Fabricated from Different Conventional Impression Techniques and Digital Impression Using Silicone Replica Technique (An in vitro study). Biomed Pharmacol J, 11 (1), 477-490. http://dx.doi.org/10.13005/bpj/13974
5. Mirzoeva, M. S., Zholudev, S. E. (2018). Sravnitel'naya kharakteristika plotnosti prileganiya keramicheskikh vkladok - eksperimental'noye issledovaniye [Comparative characteristics of the adherence density of ceramic inlays - an experimental study]. Problemy stomatologii [Dental problems], 14 (3), 41-44. (In Russ.)
6. Rogozhnikov, A. G. (2018). Rezul'taty eksperimental'nykh issledovaniy, napravlennykh na otsenku biologicheskikh svoystv modifitsirovannykh granul dioksida tsirkoniya [The results of experimental studies aimed at assessing the biological properties of the modified granules of zirconium dioxide]. Problemy stomatologii [Dental problems], 11 (3-4), 49-56. (In Russ.)
7. Timacheva, T. B., Klimova, T. N. (2016). Effektivnost' primeneniya tsel'notsirkoniyevykh konstruktsiy pri protezirovanii patsiyentov s nizkimi klinicheskimi koronkami zubov v ramkakh kontseptsii minimal'noy invazii [The effectiveness of the use of whole-zirconium structures for prosthetics of patients with low clinical tooth crowns within the framework of the concept of minimal invasion]. Mezhdunarodnyy nauchno-issledovatel'skiy zhurnal [International Research Journal], 12 (54), 5, 113-116. (In Russ.)
8. Makhmudov, M. M., Ashurov, G. G. (2018). Indeksnyye i gidrodinamicheskiye pokazateli tkaney parodonta ka kriteriy rezul'tativnosti lecheniya travmaticheskogo porazheniya tkaney parodonta konstruktsiyami zubnykh protezov [Index and hydrodynamic indicators of periodontal tissues as a criterion for the effectiveness of the treatment of traumatic lesions of periodontal tissues with dental prosthesis designs]. Problemy stomatologii [Dental problems], 13 (2), 64-68. (In Russ.)
9. Özkurt-Kayahan, Z. (2016). Monolithic zirconia: A review of the literature. Biomed Res J. , 27 (4), 1427-1436.
10. Saraswathi, D. D., Leneena, G., Babu, M. R. et al. (2016). Comparative Evaluation of Marginal Vertical Discrepancies of Full Zirconia Crowns, Layered Zirconia Crowns, and Metal Ceramic Crowns: An In Vitro Study. J Int Oral Health, 8 (2), 208-213.
11. Shatrov, I. M., Vedernikova, L. V., Zholudev, S. E. (2018). Izucheniye kachestva zhizni u patsiyentov s defektami zubov i zubnykh ryadov posle ortopedicheskogo lecheniya s ispol'zovaniyem keramicheskikh restavratsiy [The study of the quality of life in patients with defects in teeth and dentition after orthopedic treatment using ceramic restorations]. Problemy stomatologii [Dental problems], 9 (4), 53-57. (In Russ.)
12. Zinovenko, O. G., Shinkevich, M. V., Sadovskaya, I. V. (2014). Esteticheskoye protezirovaniye s primeneniyem dioksida tsirkoniya [Aesthetic prosthetics using zirconia]. Sovremennaya stomatologiya [Modern dentistry], 2 (59), 58-60. (In Russ.)
13. Gherlone, E., Mandelli, F., Capparè, P., Pantaleo, G., Traini, T., Ferrini, F. (2014). A 3 years retrospective study of survival for zirconia-based single crowns fabricated from intraoral digital impressions. Journal of Dentistry, 42 (9), 1151-1155. https://doi.org/10.1016/j.jdent.2014.06.002
14. Seok-Joon, Ha., Jin-Hyun, Cho. (2016). Comparison of the fit accuracy of zirconia-based prostheses generated by two CAD/CAM systems. J Adv Prosthodont, 8, 439-448. https://doi.org/10.4047/jap.2016.8.6.439
15. Chayka, Z. S. (2018). Sovremennyye metody planirovaniya optimal'nogo esteticheskogo rezul'tata vo frontal'nom uchastke zubnogo ryada s ispol'zovaniyem pryamykh i nepryamykh restavratsiy [Modern methods of planning the optimal aesthetic result in the frontal area of the dentition using direct and indirect restorations]. Problemy stomatologii [Dental problems], 13 (3), 80-84. (In Russ.)
16. Martínez-Rus, F., Suárez, M. J., Rivera, B., Pradíes, G. (2011). Evaluation of the absolute marginal discrepancy of zirconia-based ceramic copings. J Prosthet Dent, 105, 108-114. https://doi.org/10.1016/S0022-3913(11)60009-
17. Boitelle, P., Mawussi, B., Tapie, L., Fromentin, O. (2014). A systematic review of CAD/CAM fit restoration evaluations. J. Oral Rehabil, 41, 853-874. https://doi.org/10.1111/joor.12205
18. Molin, M. K., Karlsson, S. L., Kristiansen, M. S. (1996). Influence of film thickness on joint bend strength of a ceramic/resin composite joint. Dent Mater, 12, 245-249. https://doi.org/10.1016/S0109-5641(96)80030-3
19. McLean, J. W., von Fraunhofer, J. A. (1971). The estimation of cement film thickness by an in vivo technique. Br Dent J, 131, 107-111. https://doi.org/10.1038/sj.bdj.4802708
20. Holmes, J. R., Bayne, S. C., Holland, G. A., Sulik, W. D. (1989). Considerations in measurement of marginal fit. J prosthet dent, 62, 405-408. https://doi.org/10.1016/0022-3913(89)90170-4\
21. (2013). World Medical Association Declaration of Helsinki Ethical Principles for Medical Research Involving Human Subjects. JAMA, 310 (20), 2191-2194.
22. Holm, S. (1979). A simple sequentially rejective multiple test procedure. Scand J stat, 6, 65-70.
23. Sattar, J., Abdul-Zahra, Al., Hmedat, S. (2017). A Comparison of Vertical Marginal Fit of different Brands of Translucent Zirconia Crown Restorations. J Bagh Coll Dentistry, 29 (2), 33-41.
24. Uhanov, M. M., Karapetjan, A. A., Rjahovskij, A. N., Avakov, G. S. (2018). Metody otsenki krayevogo prileganiya nes"yemnykh protezov s oporoy na zuby i implantaty [Methods for assessing the marginal fit of fixed prostheses based on teeth and implants]. Rossijskij vestnik dental'noj implantologii [Russian Bulletin of Dental Implantology], 1-2, (39-40), 39-54. (In Russ.)
25. Riccitiello, F., Amato, M., Leone, R., Spagnuolo, G., Sorrentino, R. (2018). In vitro Evaluation of the Marginal Fit and Internal Adaptation of Zirconia and Lithium Disilicate Single Crowns: Micro-CT Comparison Between Different Manufacturing ProceduSres. Open Dent J, 12, 160-172. doi:https://doi.org/10.2174/1874210601812010160



