Development of algorithms of the automated data collection and analysis system with a machine tool CNC.

Dmitriy Petreshin; Oleg Fedonin; Vladimir Karpushkin

doi:doi:10.12737/23378

Development of algorithms of the automated data collection and analysis system with a machine tool CNC.

Published в Bulletin of Bryansk state technical university · Volume 2014, Issue 1, 2014 · Pages 58–62 · Rubrics: Mechanical engineering and transport

DOI 10.12737/23378

Received: 09.12.2016 Accepted: 09.12.2016 Published: 09.12.2016 Language of publication: RUS

Authors

Dmitriy Petreshin ¹ iD · Oleg Fedonin ² iD · Vladimir Karpushkin

1 Bryansk State Technical University (Educational-Scientific Technological Institute, Director)
Bryansk, Bryansk, Russian Federation

2 Bryansk State Technical University (Rector, Professor)
Bryansk, Bryansk, Russian Federation

ABSTRACT

Described the use of automated systems to provide data collection and analysis with CNC machine tools. The structure of an automated system to collect and analyze data from the CNC. Describes the purpose of the constituent elements of the automated system. Considered a flowchart of the automated system for the collection and analysis of relevant data with CNC machine tools. Describes the operating modes of the system.

KEYWORDS

MES System MDC (MDA) a Data Collection System CNC Machine the lgorithm works the Automated System Maintenance and Repair.

Information Text References

Authors:

1. Bryansk State Technical University (Educational-Scientific Technological Institute, Director)

Bryansk, Bryansk, Russian Federation

2. Bryansk State Technical University (Rector, Professor)

Bryansk, Bryansk, Russian Federation

Type:

Article

Pages:

from 58 to 62

Status:

Published

Language:

Russian

Keywords:

MES, System MDC (MDA), a Data Collection System, CNC Machine, the lgorithm works, the Automated System, Maintenance and Repair.

Text

Text (PDF): Read Download

References

1. Meyer, H. Manufacturing Execution Systems Optimal Design, Planning and Deployment / Heiko Meyer, Franz Fuchs, Klaus Thiel. - The McGraw-Hill Companies, 2009. - P. 271.

2. Kletti, J. Manufacturing Execution Systems - MES / Jurgen Kletti. - Springer-Verlag Berlin Heidelberg, 2007. - P. 276.

3. Information systems in industry - general concepts, definitions, terms (LIMS & MES) // Modern technologies for metal working: Proceedings - Sitek, 2008. - Access mode: http:// www.sitek-group.com/ directions/mes/article/mes1/.

4. Petreshin, D. I. Development of the automated control system of CNC cutting machines operation / D. I. Petreshin, V. A. Karpushkin // Proceedings of the XIX International Science-Tech. Conf. "Mechanical Engineering and Technosphere of the 21st Century". - Donetsk, 2012. - Vol. 2. - pp. 270-272.

5. Smirnov, A. MDC Max 5 - system of machine monitoring / A. Smirnov // CAD/CAM/CAE Observer. - 2007. - No. 5 (35). - pp. 76-78.

6. Numerical control NC201M device. PLC language interface. - SPb.: Balt-System, 2009. - 96 p.

Development of algorithms of the automated data collection and analysis system with a machine tool CNC.

Confirmation

Регистрация