SOFTWARE MODULE DEVELOPMENT FOR DEFINITION OF PERCENTAGE COMPOSITION IN ANTIWEAR COATINGS

Aleksandr Ignatov; Vitaliy Matlakhov; Anatoliy Suslov

doi:doi:10.12737/20243

SOFTWARE MODULE DEVELOPMENT FOR DEFINITION OF PERCENTAGE COMPOSITION IN ANTIWEAR COATINGS

Published в Bulletin of Bryansk state technical university · Volume 2016, Issue 2, 2016 · Pages 46–51 · Rubrics: Friction and wear

DOI 10.12737/20243

Received: 23.06.2016 Accepted: 23.06.2016 Published: 23.06.2016 Language of publication: RUS

Authors

Aleksandr Ignatov ¹ · Vitaliy Matlakhov ² · Anatoliy Suslov ³ iD

1 Moskovskiy universitet MVD Rossii imeni V.Ya. Kikotya

2 Bryansk State Technical University (Department "Automated Technological Systems", Associate Professor)
Bryansk, Bryansk, Russian Federation

3 Bryansk State Technical University (Professor, Honored Worker of Science and Technology, Laureate of the Government Prize)
, National Research Nuclear University “MEPhI” (Professor)
, Bauman Moscow State Technical University (Professor)
Bryansk, Bryansk, Russian Federation

ABSTRACT

For the analysis of material property changes depending on external factors in materials science there is used a method of the micro-structure analysis of material obtained with the aid of a special optic or electronic microscope. Recently the increasing distribution and application have obtained program-hardware complexes for the automation of metallographic researches which allow speeding up considerably this process. The basis for the development of such complexes is a technology of technical (computer) vision – the theory for the creation of models and algorithms which can carry out the detection and classification of objects and also the processing all research data. For the efficient change of FOP parameters, and also to ensure a convergence (repetition) of test results it is necessary to ensure the authenticity of research data processing. It is achieved by means of the application of a specially developed software module for the definition of percentage composition in nitridetitanium and other wearresisting coatings according to Photomath photographs. As input data for the software module there are used coating microstructure photos obtained with the aid of PMT-3M hardness meter. In the module mentioned all essential transformations for the further com-putation of a percentage composition with the obtaining of a result for a user and also saving in a database are carried out.

KEYWORDS

software module image binarization image threshold processing wear-resisting(anti-wear) coatings percentage composition

Information Text References

Authors:

1. Moskovskiy universitet MVD Rossii imeni V.Ya. Kikotya

2. Bryansk State Technical University (Department "Automated Technological Systems", Associate Professor)

Bryansk, Bryansk, Russian Federation

3. Bryansk State Technical University (Professor, Honored Worker of Science and Technology, Laureate of the Government Prize)

National Research Nuclear University “MEPhI” (Professor)

Bauman Moscow State Technical University (Professor)

Bryansk, Bryansk, Russian Federation

Type:

Article

Pages:

from 46 to 51

Status:

Published

Language:

Russian

Keywords:

software module, image binarization, image threshold processing , wear-resisting(anti-wear) coatings, percentage composition

Text

Text (PDF): Read Download

References

1. Matlakhov, V.P. Wear-resistant Coating on Tools by KIB Method/ V.P. Matlakhov, Yu.V. Darkovsky //STIN.- 2006. - №12. - pp. 17-20.

2. Matlakhov, V.P. Assurance of wear-resistance in friction cylindrical surfaces by strengthening / V.P. Matlakhov//Strengthening Technologies and Coat-ings. - М.: Mechanical Engineering, 2007. - №5(29). - pp. 41-46.

3. Gorlenko, А.О. Wear-resistance increase in friction cylindrical surfaces / А.О. Gorlenko, V.P. Matlakhov // Friction and Lubrication in Machines and Mechanisms. - 2010.- №5.- pp. 20-26 .

4. Gorlenko, А.О. Simulation of contact interaction and wear of friction cylindrical surfaces / А.О. Gorlenko, V.P. Matlakhov // Friction and Lubrication in Machines and Mechanisms. - 2007.- №8.- pp. 1-9 .

5. Matlakhov, V.P. Wear-resistance increase in friction cylindrical surfaces based on combination of nitride-titanium coating and electro-machining/ V.P. Matlakhov // Bulletin of Bryansk State Tech-nical University. - 2008.- №2.-pp. 32-38.

6. Yanshin, V.V. Image Processing in C language for IBM PC: Algorithms and Programs/ V.V. Yanshin, G.A. Kalinin. - М.: World, 1994. - pp. 320.

7. Yaroslavsky, L.P. Introduction in Digital Image Processing/ L.P. Yaroslavsky.- М.: World, 1992. - pp. 344.

8. Pratt, W. Digital Image Processing/ W. Pratt. - М.: Science, 2000. - pp. 1024.

SOFTWARE MODULE DEVELOPMENT FOR DEFINITION OF PERCENTAGE COMPOSITION IN ANTIWEAR COATINGS

Confirmation

Регистрация