Modeling of processes of finishing by abrasive pastes

Published в Science intensive technologies in mechanical engineering · Volume 1, Issue 1, 2016 · Pages 25–29
DOI 10.12737/17319
Received: 19.01.2016 Accepted: 12.02.2016 Published: 12.02.2016 Language of publication: RUS
The results of modeling of finishing process are given in this article. At modeling it is taking into account, that the process of removal of material, arising from contact of rough surfaces of workpiece and lap with lapping compound, which contains the aggregate of grains of different sizes and shapes, is a stochastic process. The obtained dependences allow to predict material removal, differentially assess the impact of individual factors on parameters of quality of parts and speed of the process.
finishing abrasive grains probability of material removing pressing force cutting force components.
Text (PDF): Read Download
References

1. Dobroskok V.L., GarashchenkoYa.N. Selection of parameters of dimensions of distribution of microgrit grains, according to specified requirements to fractions content. High Tech in mechanical engineering.Proceedings of scientificconference. Khar’kov. 2000. Iss. 1(3). Pp. 55-63.

2. Novoselov Yu.K. Dynamics of shaping of surfaces at abrasive treatment. Sevastopol: SevNTU publishers. 2012. 304 p.

3. Korolev A.V. Research of processes of generating surfaces of tool and part at abrasive treatment. Saratov, 1975.189 p.

4. Surface roughness. Probability-theoretical approach. A.P. Khusu, Yu.R. Vitenberg, V.A. Pal’mov. Moscow: Nauka, 1975. 344 p.

5. Bratan S.M. Technological bases of support of quality and increase of stability of high performance of finish and fine grinding. Doctor of engineering science dissertation.Odessa, 2006. 339 p.

Login or Create
* Forgot password?